...
User can save changes Server Security Group using button SAVE.
User can cancel his actions in Security Server Group view pressing button Escape.
...
- Direction
- Egress direction means direction from TDS Server to other hosts or networks. By default egress is allowed to all networks and for all protocols and ports.
- Ingress direction means direction from external hosts or servers to TDS Server. By default ingress is not allowed except to Application protocols and ports installed by TDS.
- Protocol
- Possible values:
- Any
- TCP
- UDP
- ICMP
- Possible values:
- Remote IP
- Source of the traffic to be allowed via this rule. Expected values should be entered in the form of an IP address block. For all IPs 0.0.0.0/0 can be used.
- Port from
- The field means a single port or beginning of the range of ports which will be used for the rule
- Valid only for TCP and UDP protocols
- Integer value between 1 and 65535 can be used only
- Port to
- The field means a single port or end of the range of ports which will be used for the rule
- Valid only for TCP and UDP protocols
- Integer value between 1 and 65535 can be used only
- Action
- Action which will be performed for the rule
- The only action which can be used for the rule is REMOVE.
- After removing of the rule from the view, it's necessary to press SAVE to write REMOVE action to Server Security Group.
User can modify existing Security Rules and save all changes pressing SAVE pressing SAVE to write REMOVE action to Server Security Group.