...

• service itself - https://github.com/jenkinsci/systemd-slave-installer-module/blob/master/src/main/resources/org/jenkinsci/modules/systemd_slave_installer/jenkins-slave.service
• service parameters/options - https://gist.github.com/dragolabs/05dfe1c0899221ce51204dbfe7feecbb
• way of service installing - https://gist.github.com/michaelneale/9635744

Introduction

Usually, Jenkins master and Jenkins agent are located in the same network, therefore it is quite easy to adopt Jenkins agents using SSH. This time we will talk about the situation when Jenkins master and bunch of other DevOps tools are running in "network A" and Jenkins agents are running in "network B". Quite often connections from A to B are rejected, however, connections from B to A are accepted. There might be various reasons, in general, network B has elevated security expectations. A typical setup is Jenkins master located in public cloud and Jenkins agent(s) located in a private customer network. Private customer network might be needed in such because some sort of higher data privacy requirements must be matched or some specialised hardware is present in customer premises and it cannot be accessible directly from the public internet.

Solution

...

• firewall opening for port tcp/9000 from relevant source agent(s) IP(s) in internal network towards internet in general (destination 0.0.0.0)
  • network layer (using TDS portal network functionality)
  • operating system layer (firewalld if needed)

...

• running in public
• listening on JNLP port tcp/9000
  • Go to https://jenkins.xxx.tds.customerx.com/configureSecurity (remember to use correct URL of your Jenkins master)
  • Set "TCP port for inbound agents" to Fixed:9000
  • Open "advanced" and choose "Inbound TCP Agent Protocol/4 (TLS encryption)" (deselect others if not relevant)
• node added according to the following steps
  • Go to https://jenkins.xxx.tds.customerx.com/computer/new (remember to use correct URL of your Jenkins master)
  • Set "Node name" to relevant name useful for you
  • Choose "Permanent"
  • Set "Remote root directory" to "/home/jenkinsope"
  • Set "Launch method" to "Launch agent by connecting it to the master" previously called "Launch agent via Java Web Start"
• copy secret/token for connecting agent
  • Go to https://jenkins.xxx.tds.customerx.com/computer/XXX (remember to use correct URL of your Jenkins master and replace XXX with the name of your node)

  • You will see something like:

    Code Block

    Run from agent command line: java -jar agent.jar -jnlpUrl https://jenkins.xxx.tds.customerx.com/computer/test/slave-agent.jnlp -secret 8b2911d98400bad5d45635b812b5f2e8e7c1d216bbbae9422a3ba57c691bf762 -workDir "/home/jenkinsope" Run from agent command line, with the secret stored in a file: echo 8b2911d98400bad5d45635b812b5f2e8e7c1d216bbbae9422a3ba57c691bf762 > secret-file java -jar agent.jar -jnlpUrl https://jenkins.xxx.tds.customerx.com/computer/test/slave-agent.jnlp -secret @secret-file -workDir "/home/jenkinsope"

    Please copy only the secret, which is for example in this case "8b2911d98400bad5d45635b812b5f2e8e7c1d216bbbae9422a3ba57c691bf762"

...

CentOS

yum install java-1.8.0-openjdk-devel git -y
# you can install also other dependencies that will be required for your jobs

Ubuntu

apt-get update; apt-get install openjdk-8-jdk git -y
# you can install also other dependencies that will be required for your jobs

...

Prepare a folder for config

mkdir -p /data/configs

Create service file /tmp/jenkinsope.service

[Unit]
Description=Jenkins Slave On Premise Executor
Wants=network.target
After=network.target

[Service]
# EnvironmentFile cannnot be used on Debian/Ubuntu anymore - Reference: https://github.com/varnishcache/pkg-varnish-cache/issues/24
# So we are using drop-in config /etc/systemd/system/jenkinsope.service.d/local.conf
ExecStart=/usr/bin/java -Xms${JAVA_MEMORY} -Xmx${JAVA_MEMORY} -jar /usr/bin/agent.jar -jnlpUrl ${MASTER_URL}/computer/${SLAVE_NAME}/slave-agent.jnlp -secret ${SECRET} -workDir "${WORK_DIR}"
User=jenkinsope
Restart=always
RestartSec=10
StartLimitInterval=0

[Install]
WantedBy=multi-user.target

Create config file /data/configs/jenkinsope.conf

JAVA_MEMORY=512m
MASTER_URL=https://jenkins.xxx.tds.customerx.com
SLAVE_NAME=XXX
SECRET=8b2911d98400bad5d45635b812b5f2e8e7c1d216bbbae9422a3ba57c691bf762
WORK_DIR=/home/jenkinsope

Create script /tmp/jenkinsope-install.sh

useradd -m -s /bin/bash jenkinsope
mkdir -p /home/jenkinsope/.ssh
chmod 700 /home/jenkinsope/.ssh
touch /home/jenkinsope/.ssh/config
chmod 600 /home/jenkinsope/.ssh/*
chown jenkinsope:jenkinsope -R /home/jenkinsope/.ssh
source /data/configs/jenkinsope.conf
wget ${MASTER_URL}/jnlpJars/agent.jar -O /usr/bin/agent.jar
chmod 644 /usr/bin/agent.jar
install -D -m 644 /tmp/jenkinsope.service /usr/lib/systemd/system/jenkinsope.service
mkdir -p /etc/systemd/system/jenkinsope.service.d
echo "[Service]" > /etc/systemd/system/jenkinsope.service.d/local.conf
sed 's#^#Environment=#g' /data/configs/jenkinsope.conf >> /etc/systemd/system/jenkinsope.service.d/local.conf
systemctl daemon-reload
systemctl restart jenkinsope
systemctl enable jenkinsope
systemctl status jenkinsope

Run install script

chmod +x /tmp/jenkinsope-install.sh
/tmp/jenkinsope-install.sh

...

Create script /tmp/jenkinsope-uninstall.sh

systemctl disable jenkinsope
systemctl stop jenkinsope
rm -f /usr/lib/systemd/system/jenkinsope.service
rm -rf /etc/systemd/system/jenkinsope.service.d
systemctl daemon-reload
userdel -r jenkinsope
rm -rf /home/jenkinsope

Run install script

chmod +x /tmp/jenkinsope-uninstall.sh
/tmp/jenkinsope-uninstall.sh

Inspired by:

...

END